Convert M2TS to HD MP4 ---- MTS/ M2TS Converter

The M2TS videos are usually recorded by AVCHD equipments and can not read by portable players. How to convert the videos to play on portable players and meanwhile avoid quality loss? My advice is to convert MTS to HD MP4 format with Pavtube MTS/ M2TS Converter. It is a useful tool to convert M2TS to other video formats with very fast conversion speed.

Please find below a step-by-step guide for directly convert M2TS to HD MP4:

Step 1. Get ready for the conversion. Click here to download Pavtube MTS/ M2TS Ripper, install and run it.

Step 2. Load M2TS videos. Click on “Add” button and navigate to your target files. When the selected M2TS files are imported to file list, check the files you would like to convert to HD MP4. You can click on “Edit” button to enter edit interface and customize your videos.

How do you extract MP3 from DVD? Well, I got Pavtube DVD Ripper. Released as a DVD ripper, it supports converting DVD to almost all popular video and audio formats.

Step 3. Set output format. Click on Format bar, select “HD Video” from the format list and in submenu you can find “H.264 HD Video (*.mp4)” and “MPEG-4 HD Video (*.mp4)” formats, check either of them and then click on the small folder icon to specify the output folder.

Step 4. Start conversion. Click on the “Convert” button and the program will convert M2TS videos to HD MP4 for you to in a few minutes. Then you can enjoy footage with lossless high quality on portable players like iPod, iPhone, Apple TV etc.

Convert MTS/M2TS to iPhone ---- MTS/ M2TS Converter

We know lots of camcorders record video in MTS/M2TS that can not be compatible with iPhone. As a matter of fact, you may want to playback these MTS/M2TS videos anytime and anywhere, for enjoy them again or show off your excellent shoot skill. At this time you need a MTS/ M2TS to iPhone converter which can help finish the task. I strongly recommend you to try Pavtube MTS/ M2TS Converter. It is a useful tool to convert MTS/ M2TS to iPhone with very fast conversion speed.

Please find below a step-by-step guide for directly convert MTS/ M2TS to iPhone:

Step 1. Get ready for the conversion. Click here to download Pavtube MTS/ M2TS Ripper, install and run it.

Step 2. Load MTS/ M2TS videos. Click on “Add” button and navigate to your target files. When the selected MTS/ M2TS files are imported to file list, check the chapters you would like to rip to iPhone. You can edit the files by clicking on “Edit” button.

What is the best way to rip DVD from disc to common video and meanwhile maintain highest visual quality? A good solution is to rip the DVD to HD movie. And that’s why you need Pavtube DVD Ripper.

Step 3. Set output format. Click on Format bar, select “iPhone” from the format list and in submenu you will find MP4 format with different resolutions and MOV format for iPhone 3G. Select the suitable format and then click on the small folder icon to specify the output folder.

Step 4. Start conversion. Click on the “Convert” button and the program will convert MTS/ M2TS videos to MP4 or MOV for you to playback on iPhone or iPhone 3G in a few minutes. Now you can enjoy your favorite footage wherever and whenever.

Convert MOD to Divx with MOD Converter

Do not know where to start with the .MOD video shot with your new JVC/Panasonic/Canon camcorder? Wanna learn how to make these video compatible with your player or codec? A best solution to get you out of the embarrassing situation is converting MOD to Divx, which is widely accepted due to its ability to compress lengthy video segments into small sizes while maintaining relatively high visual quality. How to convert MOD to Divx? Pavtube MOD Converter is one of the most popular software for MOD converting. It supports converting MOD to lossless audio and high quality video, including HD video. It is more than a Blu-Ray to MKV converter and can help you to remove Blu-Ray AACS encryption, region codes and BD+ copy protection, and copy Blu-ray to MKV movie with fast conversion speed.The converter generates Divx video in a fast speed and high visual quality. The following guide will show you how to convert MOD to Divx with Pavtube MOD Converter.

In the first place, please download Pavtube MOD Converter from here and install the program. This is a free trial version and there is no function limit so you can make full use of it.

A step-by-step guide to convert MOD to Divx:
Step One: Import the MOD files to MOD Converter
Keep your camcorder connected to PC and run the program. See the interface? Simply click Add button and browse to the MOD files you want to convert, just leave out the corresponding MOI files. Pavtube MOD Converter supports batch conversion and combining multiple footages together.

Step Two: Set Divx as output format and specify output folder
Click Format bar, point to Common Video group and then select Divx AVI format. If you pursue highest video quality, you may follow HD Video-> HD Divx. Next you need to type in output path in Output bar or click the small folder icon to specify a destination folder. The popular ways to play h.264 video after you have converterd DVD to H.264 or other video to h.264.Check Merge into one box and the selected files in file list will be combined and output as one file. Click Edit menu and enter Trim window to cut off unwanted clips and reduce the output Divx to exactly what you want.

Step Three: Converting MOD to Divx
To start conversion, simply click Convert button. A progress window will pop up and show you the converting progress. It also allows you to set auto shutdown. After conversion you can edit the videos as you like.

Watch Blu-ray movies in your car via Pioneer DVD player

Wanna watch BD movies in your car, and yet only have a Pioneer DVD player set up in your car? Actually, as long as you are willing to do it, you can totally make a breakthrough on your current situations.MOD converter is a powerful JVC camcorder Mod format video converter which can easily convert MOD to other popular video formats. As you know, Pioneer AV Receivers enable users to enjoy cinema-like video playback from DVDs or an iPod, which means the right workaround for you to watch Blu-ray movies in your car is transferring your BD files to either a DVD, or iPod videos. Since burning to another DVD is a bit troublesome, and then converting BD movies to iPod videos is a good compromise. Well, the following contents will detail the whole process for you.

What you will need:

- A Pioneer DVD Player installed in your car

- An iPod

- Pavtube Blu-Ray Ripper

- A PC, of course, with a built-in BD drive or an external BD drive

What can Pavtube Blu-Ray Ripper do for you?

Pavtube Blu-Ray Ripper is a professional utility to rip both Blu-ray discs and general DVDs to your wanted HD or SD media formats, for playback on your iPod, iPhone, PSP, Apple TV, etc.

With full Blu-ray disc support, Pavtube Blu-Ray Ripper is able to remove copyright protections of your BD disc, no matter BD+, or AACS, even MKB Version > 10 is supported as well. With advanced audio technology, it is capable of reading all audio tracks of a BD disc, including Dolby TureHD Audio and DTS-HD Master Audio, which will never let you miss the mother tongue of the movie.

Firstly, insert your Blu-ray disc to the drive, and then launch Pavtube Blu-Ray Ripper.



Step 1: Load BD files
There are three ways to import Blu-ray movies to this program, through "DVD Rom", "DVD Folder" or "IFO/ISO".

Step 2: Select output format for iPod, and set destination folder
Click the pull down menu of "Format" to select the output format according to the specifications of your iPod. Meanwhile, click the folder icon at the end of "Output" to specify where to locate the converted files.

Step 3: Adjust audio and video parameters
Click "Settings" button, and then the following interface will pop up, on which you are allowed to customize audio and video parameters including codec, bit rate, frame rate, aspect ratio, sample rate and audio channels to optimize the output file quality.
You can find a step-by-step guide for directly convert Blu-Ray to VOB


Step 4: Start conversion

Once all settings are done, you can click "Convert" button to start conversion, and the finally output files can be found via clicking "Open" button.

What you should do next is using iTunes to sync the output files to your iPod. After that, just connect iPod to the Pioneer DVD player in your car via a cable, okay, you’re done, enjoy it now. It’s the perfect way to entertain kids and adults on long and short road trips.

Convert MOD to VOB with MOD Converter

Pavtube MOD Converter is one of the most popular software for MOD converting. It will help you rebuild your JVC (MOD) and Sony (MPG) hard disc camcorder movie files to DVD standard VOB file. I would like to recommend Pavtube Blu-Ray Ripper for you to convert Blu-ray to Xbox360, as it does a good job in converting encrypted Blu-Ray disc to formats that are supported by XBOX360. The converter generates VOB video in a fast speed and high visual quality. What’s more, it is fairly easy to use, you can finish the conversion in a few clicks. If you are seeking an easy-to-use tool for converting MOD to VOB, Pavtube MOD Converter is right what you need. The following guide will show you how to convert MOD to VOB with Pavtube MOD Converter.

A step-by-step guide to convert MOD to VOB:
Step One: Import the MOD files to MOD Converter.
Keep your camcorder connected to PC and run the program. See the interface? Simply click Add button and browse to the MOD files you want to convert, just leave out the corresponding MOI files. Pavtube MOD Converter supports batch conversion and combining multiple footages together.How to rip Blu-ray to Wii? It's just a small task as for Blu-ray to Wii ripper - AVCWare Blu Ray Ripper which helps you to rip Blu-ray

Step Two: Set output format and correlative settings.
Click Format bar, point to VCD/ DVD/ SVCD group and then select VOB format with appropriate aspect ratio (4:3 or 16:9) and right video standard (NTSC or PAL). Then type in output path in Output bar or click the small folder icon to specify a destination folder. Check Merge into one box and the selected files in file list will be combined and output as one file. Click Edit menu and enter Trim window to cut off unwanted clips and reduce the output VOB to exactly what you want.

Step Three: Converting MOD to VOB.
To start conversion, simply click Convert button. A progress window will pop up and show you the converting progress. It also allows you to set auto shutdown. After conversion you can play them whenever you like.

If you are interested in Pavtube MOD Converter, please click here to learn more information about this program.

Solution to enjoy Flash Videos on iPad

The iPad really shocks and amazes us. It brings us creative logos about Apple computers. The smart design and powerful system matching enables us to enjoy peerless experience on using computer. As Jobs’ said, one of the most sparkling spots of this new apple product is to perform perfect HD movies and TV shows. The 9.7— inch LED-backlit glossy widescreen Multi-Touch display with IPS technology is also designed specially to offer us high quality image. Many of you can’t wait to watch movies and TV shows on iPad, right?


Pornotube converter is also a powerful video converter.
However, there is still flaw that iPad can’t support flash videos playback. Enjoying flash videos from Youtube, Hulu, Google etc. takes an important part in our media entertainment. It is really a pity that we can’t enjoy our favorite flash videos on such wonderful computer. To resolve this issue, I looked into many professional materials, and finally found the best methods. Here I wanna share the methods with you all.

First, one assistant tool you need—Pavtube FLV Converter for Mac. So:
1. Download, install and run this program

A sky-blue interface will be shown to you as follow:



2. Add FLV files, set output format and destination folder

Input FLV files to it by clicking on “Add” button, and select a format as the output format in the drop-down list of “Format”, here you can choose MOV or MPEG-4 for playback on iPad, meanwhile, you can press “Browse” button to specify the destination folder or just use the path set by default.



3. Set advanced settings

Click “Settings” button, the following interface will pop up. You can change the parameters like screen size, bit rate, frame rate, sample rate, etc. to optimize the output videos.
If you are looking for a Blue-ray converter to FLV tool, this Blu-ray to FLV Converter can help you a lot, it can rip and convert Blu-ray movie to FLV video


4. Convert

After all the above settings are finished, you can click “Convert” button to start conversion. Once finished, you are able to find out the output files via clicking on “Open” button.

This software can definitely complete the conversion at a swift speed without the problem of audio-video out of sync. Therefore you need not worry about these issues. And since now, you can enjoy flash videos on your iPad forever.

Learn more : http://www.pavtube.com/flv-converter-mac/

Convert MOD to WMV with MOD Converter

“I have just purchased the new JVC GZ-MG670, but when I downloaded the files onto my computer windows media player can not play them because the files are MOD. How do I convert the files to something can read and play?” A Microsoft Windows tool for comparing and documenting Oracle database schemas.Frustrated by the new dreamed JVC camcorder, my friend asked. Well, change the file extension to MPEG and play again. If this does not work, actually you need a MOD Converter for help. In this guide you will learn how to convert MOD to WMV with Pavtube MOD Converter.

Please download Pavtube MOD Converter from here and install the program. This is a free trial version and there is no function limit so you can make full use of it.

A step-by-step guide to convert MOD to WMV:
Step One: Import the MOD files to MOD Converter.

Keep your camcorder connected to PC and run the program. See the interface? Simply click Add button and browse to the MOD files you want to convert, just leave out the corresponding MOI files. Pavtube MOD Converter supports batch conversion and combining multiple footages together.

Step Two: Set output format and correlative settings.

Click Format bar, select Common Video-> WMV and then type in output path in Output bar or click the small folder icon to specify a destination folder. Check Merge into one box and the selected files in file list will be combined and output as one file. Question about new videos on youtube discussion about take part in.Click Edit menu and enter Trim window to cut off unwanted clips and reduce the output WMV to exactly what you want.

Step Three: Converting MOD to WMV.

To start conversion, simply click Convert button. A progress window will pop up and show you the converting progress. It also allows you to set auto shutdown. After conversion you can copy them to your portable player or whatever.